Thanks to the special silvery structure of 3B3D PLA Star® Filaments, the layer lines on the prints appear smoother. Since it has the same properties as 3B3D PLA® Filaments, prints with excellent surface quality can be obtained.
Spool sizes: 200mm diameter width 75mm
Extruder Temperature
200-230°C
Does not require special "Hot-end"
Bed Temperature
60-75°C
Can be turned off optionally
Nozzle Specs
0,4 mm nozzle
Standard brass can be preferred
Cooling Specs
Fan Speed: 100%
Cooling fan required
Drying Specs
50°C for 4 hours
Maximum value when needed
Heated Chamber
Suitable for open printers,
Does not require a closed or heated chamber
 
 
Physical and Chemical Properties
Invisible layers with its glittery structure
High tensile and impact strength
Low chemical resistance
High printing speed
Very low warping behavior
Excellent surface quality
Very low odor
Renewable natural raw material
Compatibility with all printers
 
3B3D PLA Star® Filament Usage Details
 
Printing Difficulty
Very easy
Temperature Resistance
60 °C
Toughness
Average
Warping
No
Odor
Low
Print Surface Finish
Average
Dissolution Behavior
Very Difficult
Flexibility
Low
Print Speed
Fast
Detailed Print
Below 0.2 mm
Nozzle Abrasion
None
Support Separation
Average
 
Filament Data Sheet download
 
NOTE:
There may be a risk of nozzle clogging due to the glitter reinforcements in it, therefore it is recommended to use 0.4 mm and above nozzles.