NEW GENERATION SPOOL
STORY OF THE PLA+ SKIN EDITION FROM FILAMENT PM
Demands for filament in the tone of skin were becoming more and more frequent. At the beginning we were subtly pushing this task aside. Honestly, we didn't know where to start. After all, there are 8 billion people in the world, what tone to choose for SKIN filament? 
In our office alone, there are 10 of us, and each of us would have a different tone to match. But in the end we accepted the challenge. Also because it is not so easy to find SKIN filament in other manufacturers. And that is why we decided to produce the SKIN edition of filaments right here in Haná.
Our American business partner Mr. Ladislav / IMADE3D, USA kick-started us at the beginning. He also dealt with the issue of SKIN filament shade and provided us with data from The Johns Hopkins Hospital located in Baltimore, Maryland, USA. Based on this data, we obtained the 7 most common tones used for the production of prostheses in this hospital.
We then had to decide what input material to use for the SKIN filament. PLA, PLA+ or PETG were in play. In the end we decided on PLA+ mainly because of its matte appearance, which is more skin acceptable than the glossier PLA. Our pigment supplier developed the shades for us and there was nothing stopping us from starting production of the SKIN edition. In the spring of 2022, the first test spools of SKIN filament were produced. Of course, we were the first ones to print them. Our test print was a prototype of a bionic hand. No problems arose during printing, as printing from PLA+ is user-friendly, the colours were consistent, matching the skin tones, so the next step was to decide what tones to present to our customers. We decided that we would make a final selection of 4 tones of SKIN filament to put on sale. But what was the key to select these 4 shades?
PARAMETERS
Diameter
1.75 mm
Tolerance
0,05 mm
Weight
1 kg
Empty spool weight
0.216 kg
Packaging weight
1.38 kg
Packaging dimensions
width: 220 mm, height: 75 mm, depth: 210 mm
Nozzle
190 - 210 °C
Heatbed
60 °C
Pantone
479 C
RAL
3012
Material
PLA+
EAN
8594185643074
Manufacturer
Filament PM (Plasty Mladeč)