3B3DPETG Transparent® Filament
3B3D PETG Transparent® Filaments have a transparent appearance compared to standard PETG filaments. The less the number of walls of the prints is kept, the more transparent prints can be obtained. All mechanical properties are the same as PETG filaments.
Spool sizes: 200mm diameter width 75mm
Extruder Temperature
230-260°C
Does not require special "Hot-end"
Bed Temperature
70-100°C
Can be turned off optionally
Nozzle Specs
0,4 mm nozzle
Standard brass can be preferred
Cooling Specs
Fan Speed: 100%
Cooling fan required
Drying Specs
50°C for 4 hours
Maximum value when needed
Heated Chamber
Suitable for open printers,
Does not require a closed or heated chamber
Physical and Chemical Properties
- High temperature resistance (85°C)
- High impact resistance
- Very high chemical resistance
- High printing speed
- Very low warping behavior
- Excellent surface quality, glossy surface
- Very low odor emitted during printing
- Can be easily printed
- Compatibility with all printers
3B3D PETG Transparan® Usage Details
| Printing Difficulty | Very easy |
|---|---|
| Temperature Resistance | 60 °C |
| Toughness | Average |
| Warping | No |
| Odor | Low |
| Print Surface Finish | Average |
| Dissolution Behavior | Very Difficult |
|---|---|
| Flexibility | Low |
| Print Speed | Fast |
| Detailed Print | Below 0.2 mm |
| Nozzle Abrasion | None |
| Support Separation | Average |
NOTE:
Due to its high fluidity structure, stringing may occur when printing detailed models. Stringing can be avoided by optimizing the retraction setting in the slicing program.